Log cabins have been popular since homes have been built. They were once the only type of houses that could be easily built with materials that were easily available. They were built in all sizes and shapes and could fit any lifestyle.
Nowadays, you can buy a kit to help you to build the log cabin of your dreams. You can buy a kit from places like Mrhandcrafted.com which sell all different types of kits for your log cabin. They can help you to choose the kit that best fits your needs.
This article will show you the steps that you need to take in order to make a log cabin. It will give you a little information about each step, as well. It will not be a comprehensive list of what you need to do, but it will help you to know what you should do.
Table of Contents
You need to consider construction timing when you decide to build your log cabin. You will want to build when the weather will not be as big a problem. You also want to build during the time of year when you will have the most daylight.
You can also decide on the conditions of the ground where you will be building. You do not want to build when the ground is frozen.
2. Necessary Tools
You want to make sure that you have all the necessary tools that you need to build your cabin. Typical tools that you may need are a circular saw, level, ladders, tape measures, electric drill, and many others:https://www.logcabinhub.com/log-cabin-tools/. You want to make sure that you have them near you so that they are easy to get to.
3. Unwrap Kit
Once the kit arrives, you want to unwrap each of the bundles so that you can see all the parts that are included in the packages. Determine what tools you may need to work with on each bundle. Gather those tools as they are necessary.
You will also need to have extra tarps and plastic wrap so that you can cover any bundles that need to be protected from the elements.
Having tarps available saves your materials and saves you extra trips to the hardware store when you are busy. Tarps and plastic wrap are just more tools that you need to have available.
You will need to keep your flooring materials off the ground to make sure that they do not warp, shrink, or swell.
If you do not protect your flooring materials, you will have floors that are warped, too small, or too large for your area. You want to protect your flooring materials.
6. Prepare Your Area
You will want to place your logs in the places where they belong. You also want to make sure the foundation is solid, level, and square. If you do not do this, you will have an uneven cabin.
7. Check Logs
You want to make sure that each log is set properly in the log beneath it. You will need a hammer that is bigger than a standard carpenter’s hammer. You might need a three-pound hammer or a small sledgehammer.
You will need to run electrical wires before you lay your flooring. You will want to take your time while doing this. You might also want to consult an electrician before you do this step.
You want to pull as much wire as you need so that they can reach all the way to the electrical circuits and electrical panel. You do not want to pull the wires as you go as this can cause issues.
9. Doors and Windows
You will want to clamp the logs together with a clamp or a ratchet strap as you put the windows and doors in. The logs tend to fan out as you get close to these openings. This step will help you to keep the logs in place.
10. Finishing Touches
Check door heights before you have everything nailed in so that you can place them and cut as needed.
You will want to bring in all the heavy things into your cabin such as the bathtub and toilet and maybe your appliances. It will be easier for you to get them in that way.
These are just a few of the steps that you need to take. Your log cabin kit will have the full instructions that you will need to follow. Have fun with your new log cabin!