Blind installation might seem like a simple endeavor, but sometimes it may not go as planned. Whether it’s uneven brackets or blinds that don’t fully cover the window, many installation issues can result in an outcome that’s not as expected. This article will explore some mistakes to avoid.
Table of Contents
Inaccurate Measurement
When installing window blinds, make sure you measure accurately. Reducing or increasing a few millimeters can result in leaving gaps, overhangs or blind spots that won’t fit properly. Unfortunately, mistakes are more common than you might imagine, especially when the work is rushed or done without a clear plan.
Visit https://iscanner.com/how-to-measure-a-window/ to learn how to measure your windows.
Some good practices to avoid incorrect measurements include using a rigid metal tape measure and measuring both width and drop at the top, middle, and bottom. Choose whether you want the blinds to sit inside or outside the frame, as this can make a big difference.
Overlooking the Wall You’re Mounting Into
Another lesser-known mistake when installing blinds is overlooking the wall on which they will be mounted. Using the wrong tools or fittings can cause blinds to fall out of alignment or fall out altogether. Different walls have different requirements and fixings, and without the right support, brackets can loosen over time.
Some people complain that their blinds don’t sit quite straight, only to discover they have been anchored to plasterboard with basic screws that aren’t up to the task. Some things to keep in mind before drilling include: plasterboard walls require the right anchors, as basic screws are often not enough.
Click here to gain more insight into safety precautions at home.
Concrete or brick needs masonry plugs and drill bits designed for hard surfaces. Tiled walls require extra care and patience to prevent cracking. If you are not sure what is behind the wall, pause and check first. Hire a professional installation company that knows how to work with different types of walls to ensure the blinds are installed properly and securely.
Installing Too Low, Too High, or Too Crooked
Getting the right height and alignment can make a great difference in the final look of the window shades. It may sound simple, but doing this work without careful planning can result in the blinds being mounted too low or too high, or slightly tilted, which becomes obvious each passing day.
Another mistake to avoid is the spirit level not actually being level. This can lead to too low or too high, or crooked. It can happen due to incorrect bracket spacing or failure to account for how the blinds will roll after fitting. Whatever the reason, even the most beautiful blind may end up looking second-rate if it is not sitting square and at the proper height.
Now, you may wonder how you can get it right. First, always use a level or laser line while marking bracket positions. For a low fit, make sure the brackets are evenly spaced and aligned across the top of the window frame.
If you are going for a face fitting, place brackets slightly above the frame to give a height illusion. Check for obstructions such as handles or trims before finishing the placement. Utilize masking tape to.mark positions before starting the holes.
Forgetting About Safety (Especially in Family Homes)
Cords and chains are sometimes considered minor details until they are within a hand’s reach. Among the most overlooked aspects of blind installation is children’s safety, especially in homes that have young children and pets. Lopped cords can pose serious hazards if not trimmed properly, making it important to ensure that all window shades meet specific child-safety standards.
These are not suggestions but procedures that are legally required in most cases, specifically if the blinds are sold and installed in a large family household. To make sure your blinds are safe for kids and pets, secure loose cords out of reach using cleats or cord tensioners.
Use cordless options or motorized blinds since they are safer and tidier options. Strictly adhere to the blind installation Cincinnati guidelines while following the manufacturer’s regulations and instructions. If you are unsure about what to do, contact the manufacturer; they will always recommend the safest and most practical option for you.
Conclusion
Installing blinds correctly can make a significant difference in how your home looks and in its safety. Avoid installing too low or too high, overlooking the wall you are mounting on or making inaccurate measurements. All these mistakes, once done, can be easily seen on the window shades. Make sure you work with a professional or do things accurately to avoid a bad outlook.
