Selecting the ideal plumbing fixtures for your house is an issue of style, affordability and functionality. Everything from the kind of material used to its water efficiency are factors that need attention. You also may want to consider what your household use is going to be, sustainability and again personal preference on design of fixtures.
You can help your water heater last longer by taking care of it through regular maintenance. If you do not have professional Kellyville plumbers nearby yet, here are some quick repairs and preventatives that can be done easily.
Table of Contents
Check the Thermostat
Ultimately, an improperly adjusted thermostat could lead to inconsistent water temperatures. Just lower it down to a warmer safe range around 120-140°F and see if the problem goes away.
Flush the Tank Annually
As the years go by, sediments built up at the tank’s bottom will make your water heater less efficient. According to Kellyville plumbers, emptying the tank prevents sediment from causing harm to your heater’s heating elements and it should be done annually. Here’s how to flush your water heater: turn it off, connect a hose to the drain valve on the bottom of the tank and run water through until clear.
Replace the Anode Rod
The role of the anode rod is to act as a type of “sacrificial lamb” by drawing all those corrosive elements that would hurt your tank, into itself. This is a rod that can wear over time and needs to be replaced every few years. You can easily test this by simply unscrewing it from the top of your tank. If the shaft is heavily corroded, it needs to be replaced.
Inspect for Leaks
Periodically inspect your water heater for leaks at the valves, connections and tank. If you notice a consistent leak, call in the tank pro. Use our guide to determine when water heater repair may be necessary.
Advantages of Hiring Professional Water Heater Repair
Working with a professional plumber is excellent because they have all the knowledge and also tooling to do the job once. This explains why most people will hire a professional plumber for anything other than simple water heater repairs.
1- Comprehensive Diagnosis
A good plumber will help you to get at what is the cause behind of a problem which may not be immediately visible. A water heater that makes a noise, for example, may need more than flushing; it might need to have parts replaced. One visit can solve a few problems. A plumber is able to decode other issues as they deliver their service.
2- Safety Assurance
Water heater repair Gas water heaters, need working with gas which is can be dangerous, if all not done correctly you could cause a deadly gas leak – Or even worse acid second or third-degree burns; electric utility water storage tank takes use of electricity power to warm the actual tanks eat one has their own primary danger. These hazards can be immediately addressed and resolved by a licensed plumber in Kellyville who is aware of the safety protocols which have to be followed.
3- Energy Efficiency
If your water heater is not functioning efficiently, a professional plumber can make some adjustments to increase the effectiveness of your hot water heating system which in turn could save you money on utility bills. That our team can make sure that the unit is installed, adjusted and insulated properly for it to work at its best.
4- Long-Term Reliability
Correct repairs and maintenance allow your water heater to work longer, adding to the return on investment. You are ensuring that your heater will last longer and the chances of it breaking down suddenly is kept to a minimum when you invest in a professional service.
Call a Plumber in Kellyville
It is common for us to turn the tap open but hardly get any hot water from a leak repair, or some other small repairs we may be able to handle ourselves through regular maintenance. However, if you suspect that your tank is being eaten up by internal corrosion in quick succession or you have noticed the pilot light goes out often (after still correctly adjusting it) then probably it’s time to call a professional plumber Kellyville and let him diagnose with the cause.
Also, if you have been thinking about getting a tank-less or high-efficiency water heater to replace your old one, which by the way is something we recommend doing sooner than later; an experienced plumber can make sure that it meets code standards and that everything was done correctly. Some of these newer models need specialized venting or have different wiring, so it is also important to let a professional handle the installation.
Conclusion
Whether you are remodeling or building a new home, fixtures will add value, comfort and efficiency in your living space. If you have questions, or if a little extra encouragement would help start the next DIY project yourself, ask your friendly plumbing professional. As long as you have a nice-looking set of fixtures that meet your needs, they will give you a lot of good years in residence with being fully functioning and looking great.
Read Next: Why Hire Professional Plumbers in Roseville, Sydney